Knowledgebase: 3G/4G
How to Setup Telstra 3G with VigorFly200
Posted by Roy Panetta on 21 October 2011 04:15 PM

VigorFly 200 Telstra 3G Setup

STEP 1: 

Insert the 3G modem on your PC and disable the SIM PIN code. This is usually found under Tools>>Options.

STEP 2:

Insert the 3G modem on your router.

STEP 3:

In web browser (IE or Firefox) access the menu page of the router (default IP address is http://192.168.1.1)

Username: admin   Password: admin

 

 

STEP 4:

Go to Wan>>Internet Access then select Connection Type 3G USB Modem

 

STEP 5:

Enter the following details

Tick  Enable 3G always On

APN Name: telstra.internet

  

 

STEP 6:

Connect the 3G  USB modem to the USB port and wait for the 3G modem to connect.

 You can also check your online status in VigorFly200 for the 3G connection status

If all text are in green (except the signal), It means that the 3g connection is working.

 

 

 

(0 vote(s))
Helpful
Not helpful

Comments (0)