Knowledgebase
How to Setup BigPond 3G with VigorFly200
Posted by Roy Panetta on 25 October 2011 12:58 PM

How to Setup BigPond 3G with VigorFly200

 

STEP 1:

 

Insert the 3G modem on your PC and disable the SIM PIN code. This is usually found under Tools>>Options.

STEP 2:

Insert the 3G modem on your router.

STEP 3:

 

In web browser (IE or Firefox) access the menu page of the router (default IP address is http://192.168.1.1)

Username: admin           Password: admin 

STEP 4:

Go to WAN  Setup page

 

  WAN Selection

 

STEP 5:

Go to Wan>>Internet Access then select Connection Type 3G USB Modem

WAN Internet Access

 

STEP 6:

Enter the following details

  1. Tick  Enable 3G always On
  2. APN Name: telstra.bigpond
  3. Enter your PPP username and password
  4. Then click OK

 

3G settings

 

STEP 7:

Connect the 3G  USB modem to the USB port and wait for the 3G modem to connect.

You can also check your online status in VigorFly200 for the 3G connection status

If all text is in green (except the signal), It means that the 3g connection is working.

Online Status



Attachments 
 
(4 vote(s))
Helpful
Not helpful

Comments (0)