Knowledgebase: Vigor3300V
Configuring QoS for VoIP device behind Vigor3300 Router
Posted by Roy Panetta on 28 November 2011 03:36 PM

For source and destination IP to specify ANY use 0.0.0.0
Under service type specify none to indicate ANY
DiffServ Codepoint leave it at "none" unless the server supports this.

Assume we want 60% bandwidth allocated to VoIP.
Assume the VoIP system is at 192.168.100.200

 Picture-1

Picture-2

Picture-3

Picture-4

 

(3 vote(s))
Helpful
Not helpful

Comments (0)