Knowledgebase
How to Configure VOIP on Vigor3300V Router
Posted by Roy Panetta on 09 December 2011 11:33 AM

Before you start to configure VOIP on your Vigor3300V router ensure that you have connected the Analogue Phones to the router and the router is connected to the Internet.

Picture-1

Your chosen VoIP Provider will supply you with the details required to configure your VoIP device. At a minimum they are:

  • Your unique username or subscriber/member number
  • Your unique password, required to access your VoIP account
  • SIP Registrar or SIP Proxy server - a domain name or IP address (e.g. sip01.astrasip.com.au)
  • SIP Port number (almost always 5060 )

For example, iiNet provides the following details:

  • Domain/Realm:        iinetphone.iinet.net.au
  • SIP Proxy Server:     sip.nsw.iinet.net.au
  • Username:              00881009
  • Password:               123456789012

 

Step 1

Log into your Vigor3300V Router Web Interface and go to “VOIP>>Protocol” configuration menu.

Picture-2

Tick the Active box and enter the SIP account details in “SIP Configuration” menu. The example used here is for iinet.

Picture-3

Step 2

Go to “VOIP>>Port Settings” configuration menu. Click on the required FXS port to edit.

Picture-4

Now enter the required details for the SIP account and select enable.

Picture-5

Step 3:  

Check that the SIP account has registered.

You should see “OK” in the “Register Status” column next to port configured.

 Picture-6

Note: To configure other FXS ports repeat the above steps.

(0 vote(s))
Helpful
Not helpful

Comments (0)