Knowledgebase: Vigor3300V
How to Set up Second Subnet on Vigor3300V and use DHCP
Posted by Roy Panetta on 09 December 2011 02:09 PM

Scenario

Currently have network 192.168.16.0 configured on LAN port 1.
Need to set up a second subnet 10.0.1.0 on LAN Port 2 with the 3300 as DHCP Server for both networks.

Solution

You may follow the steps below:
1. Enter WUI, click "Advanced - LAN VLAN "
2. Tick "802.1Q VLAN"
3. about settings you may refer to the attached picture, apply the settings.
4. Turn to "Network - LAN", now you can see second LAN settings.

Picture-1

 

(0 vote(s))
Helpful
Not helpful

Comments (0)