Knowledgebase
Block all and allow certain IP’s to access RDP from the internet. Connect remote VPN Client via IPSEC and access RDP using private IP.
Posted by on 20 January 2012 04:06 PM

You can RDP from allowed Public IP's from the internet. You can also RDP to 192.168.1.10 when connected via IPSEC (host to LAN). Please download and install the SMART VPN client 4.0.0.1 from the draytek.com website, configure the IPSEC tunnel and set the client to Virtual IP with remote address 192.168.1.1, (HIGH ESP) DES with MD5.

Firewall/firewall_61.JPG

/Firewall/firewall_62.JPG

/Firewall/firewall_63.JPG

(4 vote(s))
Helpful
Not helpful

Comments (0)