Knowledgebase: VPN and Remote Access
How can a Remote Dial-in user use a fixed LAN IP address instead of getting the IP address assigned by Vigor VPN (PPTP, L2TP) router?
Posted by on 27 January 2012 10:55 AM

Normally, Vigor will assign an IP address from the range of IP pool (set up in the PPP General Setup) for PPP related VPN client. If a client wants to use a fixed LAN IP address, he may have trouble establishing a Remote dial-in VPN connection with the Vigor router. This problem can be solved by creating an account in LAN-to-LAN profile. Suppose the router's LAN IP setting is 192.168.8.0/24 and the fixed IP used for the remote dial-in user is 192.168.8.100.

  1. For the Remote Dial-in User, configure his/her PC with the static IP address to 192.168.8.100.
     http://www.draycare.com.au/dfaq/image/VPN/06/vpn_15.JPG
  2. In the Vigor router  LAN-to-LAN profile, input "192.168.8.100" in the Remote Gateway IP field as shown below:

   VPN and Remote Access >> LAN to LAN

 

 http://www.draycare.com.au/dfaq/image/VPN/06/vpn_16.JPG

 

 

(2 vote(s))
Helpful
Not helpful

Comments (0)