Knowledgebase: USB Application
Enabling Samba on Vigor2130
Posted by on 03 February 2012 03:54 PM

In later versions of firmware (from version 1.5.1) Samba is not a built-in application so we need to install Samba before using the disk share function. The procedure below shows how to enable the SAMBA function.

 

Ensure that the router is connected to the Internet and the USB Storage device is attached to the router.

Go to USB Application>>Disk Shares menu

Click on Install

 http://www.draycare.com.au/dfaq/image/USB Application/02/usb_04.JPG

Samba Installation will start

 

http://www.draycare.com.au/dfaq/image/USB Application/02/usb_05.JPG

 

When installation completed, select “Enable Disk Sharing” to share the USB drive

 

http://www.draycare.com.au/dfaq/image/USB Application/02/usb_06.JPG

 

On your Computer you should be able to see the shared drive in Workgroup computers.

 http://www.draycare.com.au/dfaq/image/USB Application/02/usb_07.JPG

 

(1 vote(s))
Helpful
Not helpful

Comments (0)