Knowledgebase
How to Control the Conversation Time for each Trunk with Time Budget
Posted by on 15 February 2012 05:07 PM

The setting of Time Budget (suitable for outgoing calls) can be seen for SIP Trunk, ISDN Trunkand PSTN Trunk. The purpose of this setting is to control how long a conversation can continuewithin one day for each Trunk. Such function also can avoid the extension to be registered andusurped by hackers without limitations.

Some special SIP provider (e.g., Draytel) supports on-net and off-net for PSTN. Therefore eachSIP account can be configured with Time Budget. Below shows related settings of Time Budgetfor SIP Trunk, ISDN Trunk and PSTN Trunk respectively.

  • SIP Trunk

http://www.draycare.com.au/dfaq/image/VoIP/IPPBX/03/IPPBX_09.JPG

Refer to the above figure. Such SIP Trunk account can make the phone call conversation for100 minutes everyday (for the Time Budget is set with 100). When the conversation time isaccumulated up to 100 minutes, VigorIPPBX will cut off the conversation immediatelyeven if both sides on still on call.

  • ISDN

http://www.draycare.com.au/dfaq/image/VoIP/IPPBX/03/IPPBX_10.JPG

TrunkRefer to the above figure. Such ISDN Trunk account can make the phone call conversationfor 100 minutes everyday (for the Time Budget is set with 100). When the conversationtime is accumulated up to 100 minutes, VigorIPPBX will cut off the conversationimmediately even if both sides on still on call.

  • PSTN Trunk

http://www.draycare.com.au/dfaq/image/VoIP/IPPBX/03/IPPBX_11.JPG

Refer to the above figure. Such PSTN Trunk account can make the phone call conversationfor 50 minutes everyday (for the Time Budget is set with 50). When the conversation timeis accumulated up to 50 minutes, VigorIPPBX will cut off the conversation immediatelyeven if both sides on still on call.

(0 vote(s))
Helpful
Not helpful

Comments (0)