Knowledgebase: VDSL
Connecting Vigor2760 to Exetel VDSL2 (PPPoE)
Posted by Roy Panetta on 23 March 2016 01:44 PM
  1.        Download and install the latest firmware from:

 http://www.draytek.com.au/support/downloads/vigor2760-delight-series/

Firmware file: Vigor2760_v3.8.2-02v_en.zip

Picture-1

Configuration:

Select Modem Code

  •   Go to “WAN >> General Setup”
  •  Select “WAN1”
  •  “DSL Modem Code:” select “AnnexA_574307_571801

Picture-2

You can also select VDSL2 for Physical Mode settings, although “Auto” should be OK.

Picture-3

Configure Access Mode

 There is no specific configuration needed for  “WAN >> Internet Access”, following the PPPoE username and password from ISP should be enough.

Picture-4

Click to save the settings.

Now go to Dashboard page and verify that you are now connected.

Picture-5

 

(2 vote(s))
Helpful
Not helpful

Comments (0)