RSS Feed
Knowledgebase : Vigor2860 > LAN / VLAN
This guide will show you how to change the default LAN IP address for a LAN if the new IP address conflicts with an existing IP address for another LAN in the router. The router will have pre-configured default LAN settings. This document that shows th...
This video shows you how to change the default LAN IP address for a LAN if the new IP address conflicts with an existing IP address for another LAN in the router. The router used here has default LAN settings. In our example we wish to change LAN1 subne...
In this guide, we will create an 802.1Q Trunk between a Vigor2860 and DrayTek Smart Switch VigorG2260 based on the following network topology. Part A: Configure Vigor2860 1. Go to LAN >> VLAN to tick enable VLAN Configuration. The default VLAN0 has b...
This video describes the process to change the default LAN IP subnet address in the Vigor2860 and Vigor2925 routers. Changing LAN 1 IP subnet address to one that is used by another LAN in the router will cause a conflict. Therefore we need to modify the o...
In this scenario, we will configure a LAN to LAN static route using Draytek routers that link with a point to point wireless bridge. The LANs (LAN1, LAN2, and LAN3) on site (SITE 1, SITE 2, and SITE 3) can access each other through the routers (R1, R2, an...
Load Balance/Route Policy is a feature in DrayTek routers where a set of defined rules or "policies" directs traffic to the specified interface when conditions are met. This video provides an overview of this feature. [https://youtu.be/EGEAB51ZQPs] C...