RSS Feed
Knowledgebase : Vigor3900 > LAN / VLAN
n this guide we will configure four IP subnets in the Vigor3200 and assign them to a VLAN. Since the Vigor3200 only has one LAN port we will need to configure an 802.1Q VLAN trunk between the Vigor3200 and the Planet GSW-2404SF switch. On the switch we wi...
In this guide we will configure two IP subnets in a Vigor3900 router and assign each subnet to VLANs on LAN port 2 of the router. A Planet switch is attached to LAN port 2 on the Vigor3900 router, which will be configured as an 802.1Q VLAN trunk. In the P...
In this application note we will show how to configure 802.1Q VLANs on a DrayTek Vigor3900 attached to a DrayTek VigorSwitch P2261. The scenario will separate 4 groups of LAN connections on VigorSwitch into different VLANs and be allocates different IP su...
NOTE: This application note will also apply to the Vigor3900 router. In this guide we will configure two IP subnets in the Vigor2960 router and assign each of them to a VLAN. The attached Cisco switch is attached to one of the LAN ports on the router. W...
In this scenario, we will configure a LAN to LAN static route using Draytek routers that link with a point to point wireless bridge. The LANs (LAN1, LAN2, and LAN3) on site (SITE 1, SITE 2, and SITE 3) can access each other through the routers (R1, R2, an...