RSS Feed
Knowledgebase : Vigor2952
  This application note shows you how to configure the Optus supplied Netgear modem into bridge mode to interface Draytek broadband routers to Optus cable service. APPLICABLE DRAYTEK ROUTERS DrayOS Routers Vigor2860, Vigor2925, Vigor2760, Vigor283...
This application note shows how to configure the Vigor2952 router for WAN Bridge mode so a second WAN IP address assigned for the Vigor2952 WAN connection can be bridged to a secondary router attached to the Vigor2952 LAN port. This configuration is usefu...
WAN aggregation is a feature offered in the latest firmware for dual and multi-wan routers. This feature aggregates the bandwidth of each attached WAN connection to provide a higher speed Internet link. This is very useful for businesses who need higher...
This application note describes how to route all internet traffic via the Private Internet Access (PIA) VPN service using LAN to LAN VPN tunnel configuration. This configuration applies to DrayOS routers (DV2760, DV2912, DV2860, DV2925, DV2952, and DV3220...
This Application notes will discuss High Availability (HA) using "Active Standby" mode. In the scenario shown here we have three identical routers (Vigor2925) they are deployed in a campus environment where the routers are installed in three different loc...