RSS Feed
Knowledgebase : Vigor2830 > WAN
* Go to WAN General Setup then configure WAN1 * On WAN1 Enable : Yes, Active Mode: Always On, and Backup:WAN3 * On WAN2 Enable : Yes, Active Mode: Always On, and Backup:WAN3 * On WAN3 Enable : Yes, Active Mode: Backup, and Backup Type :When all WAN...
In this example we Configure WAN1 (ADSL) as the primary WAN connection and have WAN2 to be the backup WAN. Ensure WAN2 is selected as the backup WAN as shown in the diagram below General setup Page should look as shown below: Note: When WAN 1 fails ...
This guide will show you how to configure a DrayTek Vigor2830 router to Telstra NBN connection. For this example, Telstra has provided a username and password to use for PPPoE authentication. Also a fixed IP address has been provided. STEP 1 - CONNECT...
Configure 4G NetGear 320U on Draytek Vigor 2830 Go to WAN>>>Intern Access Select 3G/4G USB Modem (PPP mode) Under WAN 3 click the Details Page Under APN Name telstra.internet"note this info is available on the ISP"click apply and ok After the con...
HOW TO CONNECT A DRAYTEK VIGOR2830 ROUTER TO TPG NBN This guide will show you how to configure the DrayTek Vigor2830 router to TPG NBN connection. TPG requires a username and password to authenticate the connection so we will use PPPoE for authentication...