RSS Feed
Knowledgebase : Local Area Network (LAN) > DHCP
The most common reason for wanting to do this is where users have laptops which they use both at home and in the office. Both networks use different LAN IP Address ranges, and DHCP is used at both locations so the users don't have to keep manually changin...
Telnet to the router and type the command "srv dhcp tftpserv ". For example srv dhcp tftpserv 192.168.1.111
Below are the ways to use "srv dhcp custom" for your reference. Vigor can allow at most two additional dhcp options. -If we only need one dhcp option, we can type command below: Take option 67 for example: srv dhcp custom_option -e 1 -t 1 -...
If you require your DHCP clients to be allocated a specific domain name, you can set this option via the router telnet interface. SINGLE WAN VIGOR ROUTERS On single WAN routers (for example Vigor2800) use the command: SYS DOMAINNAME _[Domain Name Suf...
To change the DHCP lease time you will need to telnet to the router's Command Line Interface (CLI). To check the current settings enter the following command: SRV DHCP LEASETIME ? Default setting is 259200 seconds (3 Days) To change the DHCP lease...