RSS Feed
News
Aug
17
Posted by Roy Panetta on 17 August 2019 05:51 PM

Latest Application Notes

Wireless

Add VigorAP from VigorConnect

VigorConnect is a centralized management tool for DrayTek Vigor Access Points. This application note shows how to add the Access Points into VigorConnect by using the auto-discovery feature.

Click here to read this application note.

Provisioning Wireless setting to VigorAP by VigorConnect

VigorConnect is a centralized management tool for DrayTek Vigor Access Points. This application note shows how to provision wireless settings in DrayTek Vigor Access Points by using the VigorConnect tool.

Click here to read this application note.

Upgrade VigorAP's Firmware by VigorConnect

This application note shows how to upgrade the firmware in DrayTek Vigor Access Points by using the VigorConnect tool.

Click here to read this application note.

Backup and Restore AP's Config via VigorConnect

This application note shows how to backup and restore the CPE's configuration by using VigorConnect. Also, how to check that the backup/restore has taken place, and how to find the location for saved configuration files.

Click here to read this application note.

Switch

Differences between Switch types

This application note describes the differences between each of the DrayTek switch products are categorized into different types: which are:

  • Smart Lite
  • Web Smart
  • Layer 2 Managed
  • Layer 2+ Managed

Click here to read this application note

Latest Firmware

Vigor2762 V3.9.1

Improvements

  • The IP group can be used as source IP on NAT >> Open Ports.
  • The IP address can be selected as a provider host in customized DDNS profile.
  • Support SIP alias number.
  • Add the TR-069 parameter of WAN1 >> PPPoE >> Fallback account.
  • TR-069 parameter to execute the telnet command.

For a complete list of improvements refer to the release notes in the download link.

Click here to download the firmware.

Latest Software

DrayTek Device Finder V1.1.0

DrayTek Device Finder is a Windows utility to search the local network for attached DrayTek devices to aid management of these devices.

Features include:

  • Search all the local network's DrayTek devices, including Vigor Router / AP / Switch etc.
  • Display devices' Model Name, IP Address, MAC Address.
  • Provides a link to device's web user interface

Click here to download the utility

Smart VPN Client V5.1.0

Improvements

  • Support IKEv2 EAP tunnel for Windows 10.
  • Support VPN server port setup for SSL tunnel.
  • Add maximum characters placeholder for username/password setting.
  • The default setting for "Fast SSL" is changed from enabled to disabled.
  • Add "View Log" on the taskbar icon for a user directly viewing VPN logs.
  • Add "Connect / Disconnect" on the taskbar icon for a user directly connecting/disconnecting the tunnel.
  • Support "Active Profile" for "Auto run when system start up" feature. A user can choose which profile should be used.
  • Fixed: An error occurred when "Display Scale" of Windows was set to 125%.
  • Fixed: Windows would crash if a user shutdown the PC while SSL tunnel was up.
  • Fixed: Unable to display the L2TP over IPsec setting profile completely.

Click here to download the Utility

VigorConnect V1.1.2

VigorConnect software provides centralized AP management for DrayTek TR-069 based access points. Features include device status, monitor status of devices and performing scheduled tasks such as firmware upgrade, configuration backup/restore and parameter profile for mass deployment of AP devices.

Supported devices

Model                  Firmware Requirement

VigorAP 710                       v1.2.3 or later

VigorAP 810                       v1.2.3 or later

VigorAP 902                       v1.2.3 or later

VigorAP 903                       v1.2.3 or later

VigorAP 910C                     v1.2.3 or later

VigorAP 920R Series           v1.2.3 or later

More details on VigorConnect is available at: https://www.draytek.com/products/vigorconnect/

Note: Currently only the Windows version is available.

For usage instructions refer to the application notes above.

Login details are included the application note: Add VigorAP from VigorConnect

Click here to download the software

 

To subscribe to our regular news updates, click on “Subscribe” option at: http://eepurl.com/gwBeUj

If you no longer wish to receive e-mails from us, please reply with "Unsubscribe".
For more information on i-Lan Technology Pty visit http://www.i-lan.com.au/support/terms-conditions or email support@i-lan.com.au if you have a specific question that you would like addressed.

 


Comments (0)